Linear Beam

The Burgess Linear Beam Grid system provides a high specification solution for office environments. The beam sections are arranged in one direction to create a linear ceiling effect, and are used to support the ceiling panels, light fittings and partition tracks.

Beams can be produced in a variety of widths, and the tiles are generally supplied 300mm wide to lengths as required. Tiles can be produced with a square edge detail (with or without gasket) or with bevelled edges to long sides, and can be hinged from the beam if necessary.

General description:
Polyester painted steel Lay-on tiles supported by Linear Beam grid.

Size:
A range of sizes is available up to 3 metres maximum length.

Edge detail:
Square edges to all sides.

Suspension system:
Burgess Linear Beam Grid system comprising primary grid section ref: GT112 installed at 1500mm maximum centres and suspended from the soffit at 1500mm maximum centres by galvanised mild steel angle hangers ref: GT114. Hangers to be secured to primary grid using M6 or equivalent fixings. Beam grid to be secured to the primary grid using Beam Support Brackets.

Perimeter Trim:
Extruded aluminium perimeter channel trim, ref: ET181, colour Ral 9010 20% gloss.

Beam options:

Plain Beam Suitable for permanent partition location	Beam with recess and threaded extrusion Suitable for occasional partition re-location
Beam with recess and capping Suitable for occasional partition re-location
ADDITIONAL INFORMATION: To view Perforation Patterns please click here. To view Fire Performance please click here. To view Acoustic Performance please click here. To view Special Finishes please click here. To view Maintenance please click here. To view Installation Methods please click here.