Modular Beam

The Burgess Modular Beam Grid system provides an engineered solution to some of the most complex ceiling requirements. The beam sections are used to support the ceiling panels, light fittings and partition head tracks.

The main beams are arranged with plain cross noggins to create a modular diagrid ceiling. Beams can be produced to a variety of widths, and many module sizes can be accommodated (1500 x 1500mm being standard). The modules can be infilled with either a single megapanel, or a number of smaller panels to create the desired ceiling effect.

Trapezoidal beams are available for radiused applications. Large megapanels can be provided with hinges, mechanical latches and restraining wires to facilitate ease of removal and safety in operation.

General description:
Polyester painted steel Lay-on tiles supported by Modular Beam grid.

Membrane material:
Zintec steel tiles.

Size:
A range of sizes is available up to 3 metres maximum length.

Edge detail:
Square edges to all sides.

Suspension system:
Burgess Modular Beam Grid system comprising primary grid section ref: GT112 installed at 1500mm maximum centres and suspended from the soffit at 1500mm maximum centres by galvanised mild steel angle hangers ref: GT114. Hangers to be secured to primary grid using M6 or equivalent fixings. Beam grid to be secured to the primary grid using Beam Support Brackets. Cross Beams to be supported by the Main Beams and securely fixed to provide system rigidity.

Perimeter Trim:
Extruded aluminium perimeter channel trim, ref: ET181, colour Ral 9010 12% gloss.

*Please note that our Coffered Design is also available.

ADDITIONAL INFORMATION:

To view Perforation Patterns please click here.

To view Fire Performance please click here.

To view Acoustic Performance please click here.

To view Special Finishes please click here.

To view Maintenance please click here.

To view Installation Methods please click here.