Tartan

The Burgess Tartan Grid System provides a fully flexible ceiling system to suit most ceiling grid modules. Tiles are supplied either plain or in a variety of perforation patterns, and are supported by plain trim strips, which run in both directions to form a tartan pattern. Tiles can be supplied with a reinforced central lighting aperture if required. The trim strips are secured to plain crossing boxes (standard size 100 x 100mm) at each corner of the tile, which are supported to the structural soffit by threaded suspension rod.

General description:
Polyester painted steel Lay-on tiles supported by Trim Strip grid.

Membrane material:
Zintec steel tiles.

Size:
A range of sizes is available up to 3 metres maximum length.

Thickness:
0.6mm minimum, with electroplated zinc finish to BS EN 10143.

Edge detail:
Square edges to all sides.

Suspension system:
Burgess Trim Strip Grid system comprising plain trim strips with inturned long sides and out-turned ends. To be supported from plain crossing boxes suspended from the soffit, at 1500mm maximum centres, by M8 threaded suspension rods. Pre-punched slots in the trim strips to locate on tabs on the vertical flanges of crossing boxes. Trim strips and crossing boxes are provided with pre-punched holes in side flanges to allow additional screw fixing on site.

Perimeter Trim:
Extruded aluminium perimeter channel trim, ref: ET181, colour Ral 9010 20% gloss.

ADDITIONAL INFORMATION:

To view Perforation Patterns please click here.

To view Fire Performance please click here.

To view Acoustic Performance please click here.

To view Special Finishes please click here.

To view Maintenance please click here.

To view Installation Methods please click here.