High Humidity

AGGRESSIVE ENVIRONMENTS

Burgess Clip-In tiles are available in a variety of finishes for use in specific aggressive environmental conditions.

Shower Areas: For these areas we would recommend plain bevel edged Clip-In tiles with a Plastisol finish and a silicone sealant applied between the joints of tiles. Perimeter channel trims should be aluminium or painted stainless steel.

Swimming Pools: Plastisol finish plain Clip-In tiles are also suitable for use in areas such as swimming pools and changing rooms.

Kitchen Areas: For areas where normal humidity levels do not exceed 70% and adequate extract systems are in place a plain polyester painted Clip-In tile is recommended. Plastisol finish tiles should be used where humidity levels are high or where there is poor heat extract. Tiles above a direct heat source should be well ventilated to ensure surface temperature does not exceed 60ºC to avoid surface finish blistering.

Food Preparation Areas: Where a smooth frequently washable ceiling is required rather than the slightly textured finish of Plastisol, Burgess can provide plain Clip-In tiles in a Stelvetite Foodsafe finish. A silicone seal between tile joints can be used if the ceiling is required to be watertight.

Burgess are unable to guarantee an exact match from tile to tile where Plastisol is used.

Product PDF's

Introduction PDF:142Kb